Test area 7 - Dr. Zeljko Selinger St

The Detas group relies on the experience passed down from generation to generation since 1896 when in Pola (Istria), the first company was founded, manufacturing electrical components and systems.
The Detas illuminate road with lighting class M3, pedestrian and bike paths.

Technical standards for this area:

• Number of LEDs – 3
• LED light power – 67 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 104 lm/W

Contact our partner

Test area 17 - Ante Neimarevic St

LED luminaires for road lighting Siteco SL20 – with a casing made of compressed aluminium, are positioned on 8m high lamppost. The LED lamp has Constant Light Output (CLO) through its life expectancy. Both lighting class M4 (motorised traffic) and P3 (pedestrians) are qualified.

Technical standards for this area:

• Number of LEDs – 9
• LED light power – 44 W
• Colour temperature – 3.000 K
• Colour rendering index > 80
• Luminous efficacy – 103 lm/W

In the upcoming period, when is expected low traffic density, it is possible to set LED luminaires in reduced mode (comply with M5 and P4). Also, that can be controlled via power line system or RF signal (with installation).

Contact our partner

On two test areas, LED electronica has installed it’s PrecisionLux 2 luminaire which has provided a wide range of applications with its modularity, always delivering high quality, efficiency and reliability, and a solution with a combination of multiple lenses on the same luminaire, where the lens concept itself was created by mathematical models within the company, which was later confirmed by laboratory and field measurements. Such a solution enables the installation of a smaller number of luminaires for the same surface coverage while retaining average illumination and uniformity. In addition, PrecisionLux 2 luminaires on a larger test field are equipped with a standard NEMA socket, enabling future mounting of various types of sensors and controllers of our own or third-party production, thus creating a smart node within the public lighting network.

Technical standards for area 1:

• Number of LEDs – 9
• LED light power – 15 W
• Colour temperature – 4.000 K
• Colour rendering index > 80
• Luminous efficacy – 120 lm/W

Technical standards for area 2:

• Number of LEDs – 7
• LED light power – 75 W
• Colour temperature – 4.000 K
• Colour rendering index > 80
• Luminous efficacy – 110 lm/W

During the testing period, it is possible to install several different types of sensors and regulators that are connected to the lamps via the NEMA socket, thus creating the IoT environment. It is planned to incorporate measurement of power consumption characteristics of the luminaires for improved algorithming of the lighting control regime, the traffic counter station and the weather station, developed and produced in-house, integrated into the light pole and to integrate all installed system components within the PrecisionLeap SmartCity platform, as well developed in-house, with the implementation of standalone monitoring and street lighting management algorithms.

Contact our partner

Omega Software has implemented modern, energy-efficient LED luminaires with power range 20-100 W, software platform for upcoming IoT tech and smart lighting management application.

Technical standards for area 4:

• Number of LEDs – 3
• LED light power – 60 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 110 lm/W

Technical standards for area 5:

• Number of LEDs – 7
• LED light power – 19 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 110 lm/W

In the forthcoming period, the luminaires expect to develop and implement mobile and web applications for monitor for environment parameters (temperature, humidity, pressure, noise, illuminance), monitoring and control public parking spaces with smart cameras and more.

Contact our partner

Philips Unistreet Luminaires are installed at the test area 10 (Miroslav Krleza St) with road lighting class M3.

Technical standards for area 10:

• Number of LEDs – 6
• LED light power – 73 W
• Colour temperature – 3.000 K
• Colour rendering index > 80
• Luminous efficacy – 137 lm/W

TownGuide and CityCharm Luminaires with symmetrical and asymmetrical optics are installed at the test area 14 (Lenisce Square) with road lighting class P4/P3.

Technical standards for asymmetrical luminaires on area 14:

• Number of LEDs – 5
• LED light power – 24 W
• Colour temperature – 3.000 K
• Colour rendering index > 80
• Luminous efficacy – 125 lm/W

Technical standards for symmetrical luminaires on area 14:

• Number of LEDs – 4
• LED light power – 34 W
• Colour temperature – 3.000 K
• Colour rendering index > 80
• Luminous efficacy – 118 lm/W

In all lamps (both test area) is implemented managing lighting system CityTouch, that provides lamp connection with app via GPRS with wi-fi bi-directional data transfer through GSM network (the lamp is server).

In the upcoming period, installation of further lighting system possibilities is planned, as the monitoring and consumption control via WEB application accessed through WEB browser, that doesn’t require any PC installation.

Contact our partner

Lamps SMIx and SLBt, installed in test areas, with their design and technical specifications fit to several road types. Additionally, lamps are suitable for residential area, parking lots, roundabouts and the like.

Technical standards for area 6:

• Number of LEDs – 7
• LED light power – 65 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 144 lm/W

Technical standards for area 12:

• Number of LEDs – 4
• LED light power – 14 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 110 lm/W

In the upcoming period Horfam is planning to present lamps of new generation that are currently tested. In test area, they are also planning to present new tech of smart monitoring as the part of Smart City system.

Contact our partner

LED lamps from the E+ DOVE product line are installed in test area 8. As the test area 8 is roundabouts, we used E+DOVE, B solution, which is suitable for higher capacity road, roundabouts, crossroads and the rest. Roundabouts are in careful zone, which is condition to set the lamp with 100% intensity of the light output.

Technical standards for area 8:

• Number of LEDs – 4
• LED light power – 86 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 117 lm/W

In test area 9, highly effective LED luminaires from batch of production E+DOVE are installed. As the test area 9 is M4 (lower traffic street), it is used S model of E+DOVE luminaire suitable for alleys, walkways, squares and the like. Those LED lamps work in constant all-night mode with reduced intensity which is managed in advance.

Technical standards for area 9:

• Number of LEDs – 7
• LED light power – 61 W
• Colour temperature – 4.000 K
• Colour rendering index > 70
• Luminous efficacy – 115 lm/W

In the test period, there is the possibility of installing its own LLCS (LED LIGHT CONTROL SYSTEM) system that is developed in own laboratory. System possibilities include controlling, detecting and reporting any public lighting malfunction and automatic reporting to approval person (e.g. public lighting maintainer).

Contact our partner

The IoT LoRaWAN network, implemented by Micro-Link, covers the Living Lab area as well as the Koprivnica urban area.

The implemented LoRaWAN network is primarily intended to demonstrate public lighting solutions (smart lighting) within the Living Lab test zones. Public lighting management is achieved by transferring control and control data between luminaires and a central location.

LoRaWAN network technical standards:

• Frequency: 868 MHz
• Bandwidth: 125 kHz
• Network coverage: 2-5 km radius
• Data rate - 250 bit/s - 50 kbit/s
• Spreading Factor: adaptive
• Capacity: 70 000 messages per day
• Encryption: AES 128
• Interference resistance: very high

LoRaWAN is a wireless technology for long distance communication. It enables connection of battery-powered IoT devices and allows low-powered devices to communicate with Internet-connected applications over long range wireless connections.

The advantages of a LoRaWAN are:

• Long range coverage area
• Low power consumption (sensor battery life 10-20 years)
• Excellent radio signal penetration within the facility
• Very high level of data security

It is planned to use the existing IoT infrastructure (implemented LoRaWAN city network) to test other smart city services in the form of various pilot projects of innovative solutions. In the future, the LoRaWAN IoT network can be used for all urban essential services and resource management. The same communication infrastructure can be used for smart parking, smart waste management, smart meter reading (remote sensing of energy products and water), monitoring of the noise level and air quality, in addition to smart city lighting.

Contact our partner

The IoT Sigfox network, implemented by IoT net Adria, covers the Living Lab area as well as the Koprivnica urban area.

The implemented Sigfox IoT network is fully functional and available to the Living Lab partners and other interested entities who want to implement or test their existing IoT solutions.

Sigfox IoT network technical standards:

• Frequency: 868 MHz
• Bandwidth: 192 kHz
• Network coverage: 5-10 km radius
• Encryption: AES 128
• Interference resistance: very high (100HZ per message)
• 12-byte/message
• Bi-directional

Sigfox IoT is a wireless technology for long distance communication. It enables connection of battery-powered IoT devices and allows low-powered devices to communicate with Internet-connected applications over long range wireless connections.

The advantages of a Sigfox are:

• Long range coverage area
• Low power consumption
• Excellent radio signal penetration within the facility
• Very high level of data security
• Sigfox Cloud
• It is part of a global Sigfox network
• Roaming-free

It is planned to use the existing IoT infrastructure (implemented Sigfox network) to test other smart city services in the form of various pilot projects of innovative solutions. In the future, the Sigfox IoT network can be used for all urban essential services and resource management. The same communication infrastructure can be used for smart parking, smart waste management, smart meter reading (remote sensing of energy products and water), monitoring of the noise level and air quality, in addition to smart city lighting.

Location – Enter Koprivnica, Trg dr. Žarka Dolinara 18 (Campus)

Monere Digital allows users to present a fantastic visual experience by using an integrated 3D holographic system (#3DHoloDisplay). The company Monere Digital has implemented in Living Lab Koprivnica a high-tech solution for displaying, creating and managing 3D video content with a holographic effect.

The system offers the presentation of created 3D visuals (movies, animations, models) that are transformed into floating holograms in space.

Technical specifications of the implemented 3D HoloDisplay:

• 4 arms (petals)
• Diameter: 650 mm
• Life span: >50.000 working hours
• Number of LED lighting elements: 720
• Management: via a wireless network
• Power: 30 W
• Resolution: 672 x 672 pix
• D+Brightness: 1.500 cd/m²

It is possible to combine individual 3D HoloDisplay presentation units to build a 3D HoloDisplay video wall. This way, for example, the client's advertisement is displayed as a unique animation and the design is possible according to the needs of the presentation and space.

The advantages of 3D HoloDisplay technology are:

• enables an innovative marketing approach and makes the product desirable, accessible and almost tangible in space
• digital product experience in 360° space
• unlimited 3D modelling possibilities
• two forms of presentation unit: with or without protective dome
• indoor and outdoor use
• combination of several units into a single holographic video wall

In the coming period, Monere Digital will integrate 3DHoloDisplay into the public lighting infrastructure and thus enable it to meet the needs of business users in outdoor use.

Location – Enter Koprivnica, Trg dr. Žarka Dolinara 18 (Campus)

Elproms allows users of the smart socket PRO-S measuring of the electricity consumption and remote control, while the devices that are plugged can be switched on and off without the unplugging.

Smart socket PRO-S is implemented in existing installations. This Smart city solution allows ambiental lightning, monitoring of the electricity consumption, measuring the temperature and synchronization with weather forecast. The system can be managed via application or web interface. The socket monitors energy efficiency in online and offline mode.

Technical specifications of the implemented PRO-S smart socket:

• Input voltage: 100 - 240VAC
• Output voltage: 100 - 240VAC
• Max load: 16A
• Max power: 3.68KW
• Material: ABS Plastic
• Switch: to switch on/off, RGB switch
• Work temperature: 0 ºC ~ 40 ºC (32°F ~ 104°F)
• Operating humidity: 5%~90%RH
• Weight: 131.8g
• Dimensions: 3.9 x 2.6 x 3 in. (100.3 x 66.3 x 77 mm)
• Protocol: IEEE 802.11b/g/n
• Connection type: 2.4GHz, 1T1R